Owning a vehicle means that you will have to keep it maintained properly, and even be aware of the coolant. If you are not sure when to bring the vehicle in for regular maintenance inspections, make sure to contact us and we can advise you on a schedule. One important thing to remember is to replace the coolant in your vehicle, so it is in the best condition possible when you drive.
Neglecting your cooling system can result in serious damage and even complete engine failure. If the cooling system doesn’t receive regular maintenance, it’s not a question of whether it will fail, but rather when it will fail. Performing regular checkups of belts, hoses, the water pump and fluids will ensure your car remains properly cooled and healthy for many miles down the road.
The primary job of the engine’s cooling system is to remove the heat that is generated during the combustion process. The coolant temperature can be well over 200 degrees and that heat has to go somewhere, otherwise engine components are going to start failing. The key parts of the cooling system remove the heat from the engine and automatic transmission and dispel it to the air outside. The water pump circulates coolant through the engine. The coolant absorbs heat and returns it to the radiator where heat is dissipated. The thermostat regulates the coolant temperature to keep it consistent for efficient engine operation.
A major factor that affects the replacement of cooling system parts is the frequency of regular maintenance, such as coolant changes. Motorists should consult their owner’s manual for specific recommendations about how often to change antifreeze and flush the coolant system. A coolant flush and fill is basic to cooling system maintenance as new antifreeze helps the engine run cooler and a flush removes dirt or sediment that could damage other cooling system parts.
The level should be checked regularly at the reservoir and motorists are reminded to never open a hot radiator cap. If the coolant is low, a 50/50 mix of approved antifreeze and distilled water should be added.
Motorists can also do a visual inspection of hoses, belts and the radiator to help identify cooling system problems before they escalate. Radiator leaks, bulging hoses or frayed and cracked belts are clues that the cooling system is in need of maintenance.
Additional signs of cooling system problems include the vehicle temperature gauge rising near the danger zone, coolant leaks, steam or hissing sounds under the hood or the district smell of an engine that’s running hot. If you notice an issue with your vehicle, make sure to contact us so we can inspect it for you.